◎
フォロー
フォロワー4,869
POWER MINISHOP RATE 85%
  • ネット通販TOP
  • コンピュータ
  • サーバー
商品番号 : 692041573 URLをコピー
◎ Fujitsu ORACLE SPARC M10-1 /SPARC 64 4Coreライセンス/64GB 4*16GB/2*600GB (F00732)
303,028 個 (販売累計)
4
(54,247)
◎ Fujitsu ORACLE SPARC M10-1 /SPARC 64 4Coreライセンス/64GB 4*16GB/2*600GB (F00732)

  • 販売価格
    36,300円
    タイムセール価格
    28,314円
    .

    セール実施時間 17:00 ~ 00:00

    その他のタイムセール商品
  • 発送国
    国内
    送料Domestic

    ゆうメール - 無料

    発送日
    本日決済で01月15日以内に発送
  • 数量
    plus count minus count
  • カートに入れる

    選択した商品がカートに追加されました。
    カートにお進みですか?

    お気に入り追加

他の商品

    current_banner 1 all_banner 3

    同じシリーズの商品

      current_banner 1 all_banner 1
      メーカー/原産地 国内 商品の状態 新品
      発送国 国内 (日本)
      材料/素材 Fujitsu ORACLE SPARC M10-1 商品構成 型番: SPMAEAA1ES

      CPU: SPARC64 4Core ライセンス

      MEM: 64GB 4*16GB PC3L-12800R

      HDD: 2*600GB

      Power Supply: 2*PowerSuplly ? Welcome to System Control Facility Module Version 2350
      Copyright (c) 2011-2012 FUJITSU LIMITED, All Rights Reserved.
      Diagnostics : 1.CPU Register Test >> OK
      2.L2 Cache Test >> OK
      3.RTC Low Battery Test >> OK
      4.SDRAM Test >> OK
      5.RTC Operation Test >> OK
      6.SPI-FMEM Test >> OK
      Booting : [06/06]
      Loading file "/boot1/uImage" from mmc device 0:1 (xxa1)
      2618168 bytes read
      Loading file "/boot1/initramfs_image" from mmc device 0:1 (xxa1)
      3122382 bytes read
      Loading file "/boot1/p1011scf.dtb" from mmc device 0:1 (xxa1)
      8192 bytes read
      ## Booting kernel from Legacy Image at 01000000 ...
      Image Name: Linux-2.6.36.2
      Created: 2017-11-30 1:04:25 UTC
      Image Type: PowerPC Linux Kernel Image (gzip compressed)
      Data Size: 2618104 Bytes = 2.5 MiB
      Load Address: 00000000
      Entry Point: 00000000
      Verifying Checksum ... OK
      ## Loading init Ramdisk from Legacy Image at 02000000 ...
      Image Name: Initial ramdisk for Service Proc
      Created: 2017-11-30 1:05:08 UTC
      Image Type: PowerPC Linux RAMDisk Image (gzip compressed)
      Data Size: 3122318 Bytes = 3 MiB
      Load Address: 00000000
      Entry Point: 00000000
      Verifying Checksum ... OK
      ## Flattened Device Tree blob at 00c00000
      Booting using the fdt blob at 0xc00000
      Uncompressing Kernel Image ... OK
      Loading Ramdisk to 17b62000, end 17e5c48e ... OK
      Loading Device Tree to 00ffb000, end 00ffffff ... OK
      setup_arch: bootmem
      mpc85xx_rdb_setup_arch()
      arch: exit

      [ 0.420745] ===== DEBUG =====
      [ 0.455297] FMEM bank/reset : a080
      [ 0.501026] timeout control : 000f
      [ 0.546817] =================
      7.FMEM(NAND) Test >> OK
      Booting : [6/7]
      Starting udev: [ OK ]
      Setting hostname localhost: [ OK ]
      Checking filesystems
      Checking all file systems.
      [ OK ]
      Mounting local filesystems: [ OK ]
      Enabling /etc/fstab swaps: [ OK ]
      SP-FIRM start
      mount_phram.sh -- complete
      log_write_reduce.sh -- complete
      kexec_setting -- complete
      tracerotate.sh -- complete
      USB-SSD Test >> OK
      remount_usbssd.sh -- complete
      ssd_db_check -- complete
      setdefaults_boot -- complete
      DMA_WA.sh -- complete
      spdb-backup.sh -- complete
      spdb-recovery.sh -- complete
      dbinit -- complete
      splog_sem_init -- complete
      cli_db_create.sh -- complete
      procdown_setting.sh -- complete
      start /sp/bin/spdual (pid=1965)
      start /sp/bin/multid (pid=1974)
      -- complete (ACTIVE)
      -- complete (MASTER)
      -- BBID (0)
      brand_id_get.sh -- complete
      setup_defaultuser -- complete
      um_restore_accountfile.sh -- complete
      um_restore_configs -- complete
      usermod: no changes
      login_check -- complete
      hub-ctl -- complete
      sysctl -- complete
      ad_restore_configs -- complete
      ldap_regen -- complete
      nsswitch_regen -- complete
      xinetd -- complete
      service iptables -- start
      iptables: Applying firewall rules: [ OK ]
      service network -- start
      Bringing up loopback interface: [ OK ]
      service crond -- start
      Starting crond: [ OK ]
      init_script -- complete
      cli_network_setting.sh -- complete
      Warning: Time synchronization was given up.
      No ntp server suitable for synchronization found.
      Please check the ntp settings or network environment. cli_ntp_setting.sh -- complete
      service syslog-ng -- start
      Starting syslog-ng: [ OK ]
      init_script2 -- complete
      setting_remcs_conf.sh -- complete
      snmpproxy.sh -- complete
      start /sp/bin/emaild (pid=2755)
      start /sp/bin/auditd (pid=2754)
      start /sp/bin/rsyncd (pid=2753)
      start /sp/bin/ipmid (pid=2800)
      start /sp/bin/firmupd (pid=2799)
      start /sp/bin/fuseqd (pid=2798)
      start /sp/bin/ferd (pid=2826)
      start /sp/bin/sp_remcsd (pid=2825)
      start /sp/bin/rasd_slave (pid=2824)
      start /sp/bin/rasd_master (pid=2823)
      start /sp/bin/nrcid (pid=2827)
      start /sp/bin/fnld (pid=2838)
      start /sp/bin/servicetag (pid=2837)
      start /sp/bin/hwcd (pid=2931)
      start /sp/bin/seqd (pid=2930)
      start /sp/bin/prid (pid=3059)
      start /sp/bin/ttyds (pid=3093)
      start /sp/bin/cmdds (pid=3092)
      start /sp/bin/cmdd (pid=3091)
      start /sp/bin/ttydm (pid=3113)
      start /sp/bin/codd (pid=3114)
      start /sp/bin/coremgrd (pid=3131)
      sleep_master.sh -- complete
      cli_scf_ready_after_setting.sh -- complete
      settmpnetwork.sh -- complete
      snmpd.sh -- complete
      snmpwatch.sh -- complete
      checkbrand.sh -- complete
      multi_set_system_scf_ready.sh -- complete
      ready_check.sh -- complete
      initiate_patroldiag.sh -- complete
      initiate_remotestorage_watch.sh -- complete
      -- initialize complete (SCF_READY) msek195xscf login: default
      Change the panel mode switch to Locked and press return...
      Leave it in that position for at least 5 seconds. Change the panel mode switch to Service, and press return...
      XSCF>
      XSCF>
      XSCF> restoredefaults -c factory WARNING:
      If this system does not have BACK UP, this command will set all the user
      settable XSCF configuration parameters to their default value as they
      were set when the system was shipped out.
      Furthermore, this command will delete all logs in the intended chassis XSCF.
      Check the man page of this command before you run it. Continue?[yes/no](default no):yes
      You must check the following points. 1. Have the ability to power cycle the system.
      2. Have access to the serial console and hold the serial console of the
      XSCF to confirm the completion of the command. If you answer "yes" this command will HALT the XSCF when it completes.
      You will need to power cycle the system after the XSCF BOOT STOP. Do you really want to continue? Continue?[yes/no](default no):yes
      The initialization of XSCF will be started.
      XSCF : all data clear (exclude SYSTEM ID data)
      BACK UP : all data clear (exclude SYSTEM ID data)
      XSCF will be automatically rebooted. Afterwards, XSCF will be initialized.
      Continue?[yes/no](default no):yes
      Disabling IDIAG prompt complete
      Setting FRUID-ROM to writable complete
      Backup common DB complete
      Syncing file systems... complete
      XSCF shutdown request was completed.
      XSCF> initiate_remotestorage_watch.sh -- complete
      initiate_patroldiag.sh -- complete
      ready_check.sh -- complete
      multi_set_system_scf_ready.sh -- complete
      checkbrand.sh -- complete
      snmpwatch.sh -- complete
      snmpd.sh -- complete
      settmpnetwork.sh -- complete
      cli_scf_ready_after_setting.sh -- complete
      sleep_master.sh -- complete
      snmpproxy.sh -- complete
      setting_remcs_conf.sh -- complete
      service syslog-ng -- stop
      Stopping syslog-ng: [ OK ]
      init_script2 -- complete
      cli_ntp_setting.sh -- complete
      cli_network_setting.sh -- complete
      service iptables -- stop
      iptables: Flushing firewall rules: [ OK ]
      iptables: Setting chains to policy ACCEPT: nat filter [ OK ]
      iptables: Unloading modules: [ OK ]
      service network -- stop
      Shutting down loopback interface: [ OK ]
      service crond -- stop
      Stopping crond: [ OK ]
      service xinetd stop
      Stopping xinetd: [ OK ]
      init_script -- complete
      -- complete stop (spinit)
      mainte_dbcopy.sh -- complete
      tracerotate.sh -- complete
      init: console main process (3518) killed by TERM signal
      init -- complete
      Entering non-interactive startup
      -- process stoped (spinit)
      Stopping lighttpd: [ OK ]
      Shutting down ntpd: [ OK ]
      Stopping sshd: [ OK ]
      Sending all processes the TERM signal... [ OK ]
      Sending all processes the KILL signal... [ OK ]
      Saving random seed: [ OK ]
      Sync file systems
      Unmounting file systems: [ OK ]
      mount: /dev/shm [ 565.514581] ff72e000: 00000000 00010000 00000000 00000000
      [ 565.580257] ff72e010: 00000000 00000000 00000000 00000000
      [ 565.646662] ff72e020: 00000000 ff8d00f8 00000020 00008008
      [ 565.712340] ff72e030: 00000000 007f0003 007f0003 00000000
      [ 565.778013] ff72e040: 05f30000 10101010 00000000 00000000
      [ 565.844924] Starting new kernel
      setup_arch: bootmem
      mpc85xx_rdb_setup_arch()
      arch: exit

      [ 515.557242] ===== DEBUG =====
      [ 515.591821] FMEM bank/reset : a000
      [ 515.637524] timeout control : 004f
      [ 515.683310] =================
      1.FMEM(NAND) Test >> OK
      Booting : [1/1]
      Starting udev: [ OK ]
      Setting hostname localhost: [ OK ]
      Checking filesystems
      Checking all file systems.
      [ OK ]
      Mounting local filesystems: [ OK ]
      Enabling /etc/fstab swaps: [ OK ]
      SP-FIRM start
      mount_phram.sh -- complete
      log_write_reduce.sh -- complete
      kexec_setting -- complete
      tracerotate.sh -- complete
      USB-SSD Test >> OK
      remount_usbssd.sh -- complete
      ssd_db_check -- complete
      FACTORY mode clear : start
      FACTORY mode clear : sun_setdefault complete
      FACTORY mode clear : sun_initdbs complete
      FACTORY mode clear : REMCS initialization complete
      FACTORY mode clear : SPI-FMEM clear complete
      Initializing COMMON_PANEL.db DUAL.db FIRMUP.db... complete
      Removing FRU.db... complete
      Removing SETUP*.db... complete
      FACTORY mode clear : XSCF DB clear complete
      FACTORY mode clear : restore user accounts from default settings complete
      FACTORY mode clear : BACK UP DB clear complete
      FACTORY mode clear : NRCI initialization complete
      Cleaning under /data/log/sync recursively... complete
      Cleaning under /data/log/nosync recursively... complete
      Cleaning under /data/log/process_down_log recursively... complete
      Initializing SCF log... complete
      Cleaning under /data/apcs recursively... complete
      Cleaning under /data/log/monitor_log recursively... complete
      Cleaning under /data/audit recursively... complete
      Cleaning under /data/sptrace_backup recursively... complete
      Cleaning under /data/var recursively... complete
      Cleaning under /data/vboot recursively... complete
      Cleaning under /data/nrci recursively... complete
      Removing whole /data/md_store... complete
      Removing whole /data/firm/cmu... complete
      Removing whole /data/firm/obp... complete
      Removing whole /data/firm/pcibox... complete
      Removing /data/panel_fru.flg... complete
      Removing /data/procdown_info... complete
      Removing /data/var/sp/home/.ssh/authorized_keys.*... complete
      Removing /data/tmp/ntp/peerstats*... complete
      Removing /data/tmp/ntp/loopstats*... complete
      Removing /data/var/sp/home/.bash_history... complete
      Removing /data/var/sp/home/.lesshst... complete
      Cleaning under /var/log recursively... complete
      Cleaning under /sp/log/core recursively... complete
      Cleaning under /root/.ssh recursively... complete
      Removing /sp/log/monitor.log*... complete
      Cleaning /hcp0/usr/local/ssl/servercert.pem... complete
      Cleaning /hcp0/usr/local/ssl/serverkey.pem... complete
      Cleaning /hcp0/usr/local/ssl/csr.pem... complete
      Cleaning /hcp0/usr/local/ssl/cert.pem... complete
      Cleaning /hcp0/etc/pki/CA/... complete
      Cleaning /hcp0/etc/ssh/ssh_host_key.pub... complete
      Cleaning /hcp0/etc/ssh/ssh_host_key... complete
      Cleaning /hcp0/etc/ssh/ssh_host_rsa_key.pub... complete
      Cleaning /hcp0/etc/ssh/ssh_host_rsa_key... complete
      Cleaning /hcp0/etc/ssh/ssh_host_dsa_key.pub... complete
      Cleaning /hcp0/etc/ssh/ssh_host_dsa_key... complete
      Cleaning /hcp0/etc/localtime... complete
      Cleaning /hcp0/etc/ntp/drift... complete
      Cleaning /hcp0/etc/pam_ActiveDirectory.conf... complete
      Cleaning /hcp0/etc/pam_ActiveDirectory/... complete
      Cleaning /hcp0/etc/pam_ldapSSL.conf... complete
      Cleaning /hcp0/etc/pam_ldapSSL/... complete
      Cleaning /hcp0/sp/etc/bash_history... complete
      Cleaning /hcp0/sp/tmp/... complete
      Cleaning /hcp1/usr/local/ssl/servercert.pem... complete
      Cleaning /hcp1/usr/local/ssl/serverkey.pem... complete
      Cleaning /hcp1/usr/local/ssl/csr.pem... complete
      Cleaning /hcp1/usr/local/ssl/cert.pem... complete
      Cleaning /hcp1/etc/pki/CA/... complete
      Cleaning /hcp1/etc/ssh/ssh_host_key.pub... complete
      Cleaning /hcp1/etc/ssh/ssh_host_key... complete
      Cleaning /hcp1/etc/ssh/ssh_host_rsa_key.pub... complete
      Cleaning /hcp1/etc/ssh/ssh_host_rsa_key... complete
      Cleaning /hcp1/etc/ssh/ssh_host_dsa_key.pub... complete
      Cleaning /hcp1/etc/ssh/ssh_host_dsa_key... complete
      Cleaning /hcp1/etc/localtime... complete
      Cleaning /hcp1/etc/ntp/drift... complete
      Cleaning /hcp1/etc/pam_ActiveDirectory.conf... complete
      Cleaning /hcp1/etc/pam_ActiveDirectory/... complete
      Cleaning /hcp1/etc/pam_ldapSSL.conf... complete
      Cleaning /hcp1/etc/pam_ldapSSL/... complete
      Cleaning /hcp1/sp/etc/bash_history... complete
      Cleaning /hcp1/sp/tmp/... complete
      FACTORY mode clear : cleaning log files on XSCF complete
      Cleaning under /ssd/apcs recursively... complete
      Cleaning under /ssd/core_save recursively... complete
      Cleaning under /ssd/fer recursively... complete
      Cleaning under /ssd/rsync_cache recursively... complete
      Cleaning under /ssd/snapshot recursively... complete
      Cleaning under /ssd/snapshot_col recursively... complete
      Cleaning under /ssd/vboot recursively... complete
      Cleaning under /ssd/nrci recursively... complete
      Removing whole /ssd/md_store... complete
      FACTORY mode clear : cleaning files on USB-SSD complete
      FACTORY mode clear : syncing file systems... complete
      FACTORY mode clear : complete Please turn off the breaker after XSCF halt. setdefaults_boot -- complete
      mainte_dbcopy.sh -- complete
      tracerotate.sh -- complete
      init -- complete
      init: rc3 main process (1429) killed by TERM sig
      localhost login: Entering non-interactive startup
      -- process stoped (spinit)
      Sending all processes the TERM signal... init: console main process (4143
      localhost login: Sending all processes the KILL sinit: console ma
      localhost login: Saving random seed: [ OK ]
      Sync file systems
      Unmounting file systems: [ OK ]
      mount: /dev/shm not mounted already, or bad opti[ 986.063060] ff72e000: 00000000 00010000 00000000 00000000
      [ 986.128741] ff72e010: 00000000 00000000 00000000 00000000
      [ 986.194415] ff72e020: 00000000 ff8d00f8 00000020 00008008
      [ 986.260096] ff72e030: 00000000 007f0003 007f0003 00000000
      [ 986.325771] ff72e040: 05f30000 10101010 00000000 00000000
      [ 986.392641] Starting new kernel
      setup_arch: bootmem
      mpc85xx_rdb_setup_arch()
      arch: exit

      [ 1030.952544] ===== DEBUG =====
      [ 1030.987136] FMEM bank/reset : a000
      [ 1031.032885] timeout control : 00cf
      [ 1031.078615] =================
      1.FMEM(NAND) Test >> OK
      Booting : [1/1]
      REBOOT: BOOT STOP (recover by NFB-OFF/ON)
      (reason=0x02 counter=0 threshold=0 bupmem_counter=0 factor=a00000cf) Welcome to System Control Facility Module Version 2350
      Copyright (c) 2011-2012 FUJITSU LIMITED, All Rights Reserved.

      [ 0.420735] ===== DEBUG =====
      [ 0.455290] FMEM bank/reset : a080
      [ 0.501018] timeout control : 000f
      [ 0.546809] =================
      7.FMEM(NAND) Test >> OK
      Booting : [6/7]
      Starting udev: [ OK ]
      Setting hostname localhost: [ OK ]
      Checking filesystems
      Checking all file systems.
      [ OK ]
      Mounting local filesystems: [ OK ]
      Enabling /etc/fstab swaps: [ OK ]
      Entering non-interactive startup
      SP-FIRM start
      mount_phram.sh -- complete
      log_write_reduce.sh -- complete
      kexec_setting -- complete
      tracerotate.sh -- complete
      USB-SSD Test >> OK
      remount_usbssd.sh -- complete
      SSD DB set default
      ssd_db_check -- complete
      setdefaults_boot -- complete
      DMA_WA.sh -- complete
      spdb-backup.sh -- complete
      spdb-recovery.sh -- complete
      dbinit -- complete
      splog_sem_init -- complete
      cli_db_create.sh -- complete
      procdown_setting.sh -- complete
      start /sp/bin/spdual (pid=1872)
      start /sp/bin/multid (pid=1881)
      -- complete (ACTIVE)
      -- complete (MASTER)
      -- BBID (0)
      brand_id_get.sh -- complete
      setup_defaultuser -- complete
      um_restore_accountfile.sh -- complete
      um_restore_configs -- complete
      login_check -- complete
      hub-ctl -- complete
      sysctl -- complete
      ad_restore_configs -- complete
      ldap_regen -- complete
      nsswitch_regen -- complete
      xinetd -- complete
      service iptables -- start
      iptables: Applying firewall rules: [ OK ]
      service network -- start
      Bringing up loopback interface: [ OK ]
      service crond -- start
      Starting crond: [ OK ]
      init_script -- complete
      cli_network_setting.sh -- complete
      cli_ntp_setting.sh -- complete
      service syslog-ng -- start
      Starting syslog-ng: [ OK ]
      init_script2 -- complete
      setting_remcs_conf.sh -- complete
      snmpproxy.sh -- complete
      start /sp/bin/emaild (pid=2439)
      start /sp/bin/auditd (pid=2438)
      start /sp/bin/rsyncd (pid=2437)
      start /sp/bin/ipmid (pid=2488)
      start /sp/bin/firmupd (pid=2487)
      start /sp/bin/fuseqd (pid=2486)
      start /sp/bin/rasd_slave (pid=2515)
      start /sp/bin/sp_remcsd (pid=2517)
      start /sp/bin/rasd_master (pid=2514)
      start /sp/bin/ferd (pid=2518)
      start /sp/bin/nrcid (pid=2519)
      start /sp/bin/fnld (pid=2529)
      start /sp/bin/servicetag (pid=2528)
      start /sp/bin/hwcd (pid=2620)
      start /sp/bin/seqd (pid=2619)
      start /sp/bin/prid (pid=2843)
      start /sp/bin/ttyds (pid=2869)
      start /sp/bin/cmdds (pid=2867)
      start /sp/bin/cmdd (pid=2866)
      start /sp/bin/codd (pid=2894)
      start /sp/bin/ttydm (pid=2893)
      start /sp/bin/coremgrd (pid=2938)
      sleep_master.sh -- complete
      cli_scf_ready_after_setting.sh -- complete
      settmpnetwork.sh -- complete
      snmpd.sh -- complete
      snmpwatch.sh -- complete
      checkbrand.sh -- complete
      multi_set_system_scf_ready.sh -- complete
      ready_check.sh -- complete
      initiate_patroldiag.sh -- complete
      initiate_remotestorage_watch.sh -- complete
      -- initialize complete (SCF_READY) localhost login: default
      Change the panel mode switch to Locked and press return...
      Leave it in that position for at least 5 seconds. Change the panel mode switch to Service, and press return...
      XSCF>
      XSCF>
      XSCF> testsb -v -p -s -a -y
      Initial diagnosis is about to start, Continue?[y
      決済方法 VISA, MasterCard, AMEX, JCB card, PayPal, LINE Pay, PayPay, コンビニ決済, Suica決済, あと払い(ペイディ), 銀行振り込み, ネットバンキング, Qサイフ
      A/S情報 A/Sセンターおよびメーカーまたは販売者にご連絡ください。
      返品/交換 商品ページ上の詳細やお知らせ・ご注意を参考してください。
      Yahoo!オークション -「fujitsu sparc」の落札相場・落札価格
      Fujitsu SPARC Servers : Fujitsu Global
      ORACLE FUJITSU SPARC M10-1 3.2GHZ 16 CORE 2 X PS NO MEMORY. DISK OR RAILS  CA0736 | eBay
      Yahoo!オークション -「fujitsu sparc」の落札相場・落札価格
      Used Fujitsu SPARC M10-4 Oracle Servers
      Sun Oracle Fujitsu M10-1 SPARC64 16-Core 3.2GHz Motherboard 7060744/  7088702 | eBay
      Sun Oracle Fujitsu M10-1 SPARC64 16-Core 3.2GHz Motherboard 7060744/  7088702 | eBay
      Oracle Fujitsu M10-1 Sparc Server
      富士通 Oracle SPARC M10-1 SPARC64-X+ 3.2GHz 96GB 600GBx2台(SAS2.5インチ) AC*2  4ポートGbE
      UNIXサーバ SPARC M10-1 : 富士通
      Fujitsu M10-4 - Fujitsu Global
      Yahoo!オークション -「fujitsu sparc」の落札相場・落札価格
      ◎ Fujitsu ORACLE SPARC M10-1 /SPARC 64 4Coreライセンス/64GB 4*16GB/2*600GB ( F00732) - サーバー
      楽天市場】富士通 Oracle SPARC M10-1 SPARC64-X 2.8GHz 96GB 600GBx4台(SAS2.5インチ) AC*2  【中古】【20180702】 : TCEダイレクト楽天市場店
      Used Fujitsu SPARC M10-4 Oracle Servers
      • 商品満足度

        4.2 5
      • 採点分布

        • 5つ★
          81%
        • 4つ★
          5%
        • 3つ★
          14%
        • 2つ★
          0%
        • 1つ★
          0%

      項目別評価

      つけ心地

      満足です

      91%
      発色の良さ

      満足です

      100%
      盛れ感

      満足です

      98%
      つけ心地
      満足です
      91%
      イマイチ
      9%
      発色の良さ
      満足です
      100%
      イマイチ
      0%
      盛れ感
      満足です
      98%
      イマイチ
      2%
      • 4 5

        夏休みに海へ行くのでラッシュガードを探していました。
        私のものをこちらのお店で買うことにしたので、
        だんなさんのものも一緒に選びました。
        昨日の午前中に注文して今日届きました。
        早いのでうれしいです。
        実際の商品は想像していたものよりもっと良かったです。
        私のもメンズのも着ると少しヒヤッとして気持ちいいです。
        170cmで細いのでMにしました。
        袖丈ピッタリ、身幅は余裕があります。
        このお値段には見えないし、とても良い買い物が出来ました。

      • 4 5

        来年用にとトライアングルの入荷を待ってワイドを購入。あけてびっくり!まず飛び出てパッっと勝手に広がるので手間な作業なく設置完了。そして広さにびっくり!6歳4歳の子供、私と186cmの主人が入っても広々です!子供なんて立てる高さと広さです。来年の海水浴が楽しみです^^

      • 5 5

        問題なく使えています。お値段安くてよかったです。

      • 4 5

        自転車に乗る機会が多いので助かってます。ポンチョなので手の動きもスムーズにできて凄くいいです。

      • 4 5

        160cm55kg 40代
        MかLかで迷いましたが、リビューを読んでMを購入。ちょうど良かったです。
        実物は、かなり落ち着いた色です。

      • 5 5

        すごくやさしい色合いで春らしくてとても気に入りました
        今回ピンクとバイオレットとグリーンを購入しました。グリーンは、母親にプレゼントのつもりです。肌触りも好きです。長さが思っていたよりも長くて巻き方などアレンジがいろいろ考えられてよかったです。値段も前に見たときより安くて得しちゃいました。ありがとうございました。

      • 4 5

        贈物として購入しました。配達状況を確認できて安心しました。とても汗っかきのため、首の後ろから風が出るのが最高と言っていました。

      ショップお気に入り割引
      ショップをお気に入り登録した後、
      クーポンを獲得することができます。
      パスワード入力
      パスワードの入力が必要なクーポンです。
      パスワードを入力してください。
      ショップお気に入り割引
      ショップをお気に入り登録した後、
      クーポンを獲得することができます。
      ショップお気に入り割引
      ショップをお気に入り登録すると
      100円割引されます!